Device Protection
Devices stored horizontally on fixed shelves for compact and protective storage.
Shelves are tilted back slightly to enable device to shuffle into position and remain stable during movement.
Includes electrostatic discharge (ESD), over-voltage, over-current and over-temperature protection.
Charging
Charges 32 USB tablets up to 11″ screen size – plus mobile phones, POS, e-readers, PDAs, scanners or any other USB chargeable devices.
Two Boost+ 16-USB A hubs are clip-mounted in the side of the cart to power and sync devices and can be unclipped and used externally if required.
Auto-detects attached devices individually and automatically adjust the current output to the highest level permitted by the device manufacturer and USB specifications.
Once fully charged, trickle charging will commence at a rate equal to its self-discharge rate, enabling the battery to remain at 100%.
Syncing
Managed USB A hub/s delivers high-speed data transfer rates for syncing and works independently to the Operating System (OS), data transfer can be performed to all common mobile operating systems, such as iOS, Android and Microsoft.
Simultaneously synchronise devices using MDM software such as Apple Configurator, iTunes and others, saving time when deploying apps, setting up profiles, media and content – Boost+ is transparent to the MDM software and the host computer, the host computer recognises only the mobile devices.
Working independently to the OS you can charge, connect, manage and monitor the state of all ports and attached devices using the Cambrionix LiveViewer App. Device ID and serial numbers can be associated with port number and charging data to reveal how much charge each device has received, whilst switching between charging and syncing modes.
Enables you to sync (data transfer) and charge the device at an enhanced rate that other USB hubs cannot, most UBS hubs charge devices at a trickle rate while syncing. Our hubs are built differently and offer the valuable feature of being able to charge devices while they are in sync mode.
Designed to provide a charge rate of approximately 1.5A in sync mode, by utilising the CDP (Charging Downstream Port) functionality built into our hubs and devices. A normal sync rate charge is 500mA. This is ideal if you need to leave devices connected to a host to sync and charge overnight, as it means they will charge whilst syncing and continue after the data transfer has completed, ensuring the device is fully charged when needed.
IEC socket with 1.8m / 6ft power cord designed to snap out if pulled away from the wall to prevent damage.
Cable Management
Cable clip portholes located on either side of each device storage shelf to ensure cable is locked into position and free from damage.
Cables feed from side power compartment to front device compartment via cable clip portholes, preventing cables being removed from the device compartment.
