This impressive projector audio system from Vision includes the CS-1300 Ceiling Speakers, AV1301 Amp, a 3.5mm Minijack to 2-phono cable (2M), 2-phono to 2-phono cables (2M) and 2 x Speaker cables (5m)
CS-1300 Ceiling Speakers
The CS-1300 ceiling speakers feature a two-way design and offer a full-bandwidth delivery full of control and clarity. The main driver is a 6.5" polypropylene cone, complimented by a ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. These low impedance speakers don't sacrifice frequency range in the way that the transformer on 100/70v speakers inherently do, meaning lower bass extension and higher treble without distortion.
These speakers are a perfect alternative for situations where wall speakers are not appropriate.
- Power Handling - 30W RMS
- Woofer - 6.5"
- Tweeter - 1" Silk
- Speaker Terminals - Bare-wire spring type
- Nominal Impedance - 8 ohms
- Sensitivity - 89dB (1w/1m)
- Frequency Response - 80Hz-20kHz
- Speaker Dimensions - 235 x 105mm (91/4 x 41/8")
- Mounting Depth - 95mm (33/4")
- Speaker Weight - 3kg (per pair)
- Colour - White
- Warranty - 2 year return to base
AV-1301 Amplifier
Based on the best-selling AV-1300, the AV-1301 features a fully revised internal design and an all new protection circuit to make it the most robust amplifier in its class. This workhorse will deliver up to 25 watts (RMS @ 8ohms) into your speakers, and work faultlessly in any environment: corporate, education and training, or worship.
It features 4 stereo inputs on the rear panel, with another two microphone inputs on the front panel for voice reinforcement. Simply plug in your iPod, laptop, CD player - or any kind of device you need to amplify.
- Amplifier Dimensions - 420 x 290 x 100mm
- Packaged Weight - 5.6kg
- Colour - Black
- Inputs - 4 x Stereo inputs via phono connectors, 2 x Microphone inputs via 6.3mm jacks
- Speakers - 2 x 25w @ 8 ohms
- Total Harmonic Distortion less than or equal to 1% (80H~12.5kHz)
- Frequency response (line in) - 80Hz~12.5kHz(±2dB)
- Signal to noise ratio (line in)- more than or equal to 77dB (A-weighted)
- Rating input level/Impedance - line in 500mV/47kohms Microphone in 15mV/600ohms
- Power consumption (rating condition) - less than or equal to 90W
- ACCESSORIES INCLUDED - 1 x 2-phono to 2-phono cable 2m long, 1 x 2-phono to 3.5mm minijack cable 2m long, 1 x Euro Figure-8 Power cable 2m long, 1 x UK Figure-8 Power cable 2m long
