13-Jun-2007 Jonathan: Would this mount be suitable for the Acer AT3720 37 inch LCD TV - EV.M2407.001 ?? as the tv weighs 28kg, and the mount supports 30kg, although its max size is 32" ?

Easycom: no this isn't suitable. The hole alignment is different, you would need PT1

16-Jun-2007 jag: would this wall mount be suitable for this t.v Samsung LE32R74BDX 32 Inch HD Ready LCD TV

Easycom: No you need t o use FT1

20-Jun-2007 julie: would this mount be suitable for a HANJT261 LCD tv which we purchased from you

Easycom: Check the holes on the back of the TV to see what their spacings are (100x100mm or 200x200mm)v this will fit upv to a max of 200x200

28-Jun-2007 Hanna: Would this bracket fit the AOC 32" HDMI ready LCD TV you were selling a while back? It had six holes in the back ::: like that they're all 200mm apart! Cheers

Easycom: yes it should fit

3-Jul-2007 ajay: would this wall mount be suitable for samsung LE32r8

Easycom: no you need FL1

4-Jul-2007 Becky: Can i use this wall mount for Samsung LE26R88?

Easycom: yes it should fit

7-Jul-2007 Peter Leverick: I want to install my LG 32LC2D about 2ft below a horizontal timber beam (in the middle of a room). I was thinking of attaching a vertical timber to the beam and fixing the 'LCD501 Tilt LCD Wall Mount' to that. will this work and how thick should the vertical timber be.

Easycom: to solve your problem, we have just sourced some new brackets for this purpose. they will support up to 40" tvs & will cost £129

12-Jul-2007 Al Tann: Is this suitable for the LG 32LCD TV? How easy is the attachments when fitting the Tv to the wall how does it work?

Easycom: no itis too small. I would use FL1

30-Jul-2007 Tom: Hi there, i have just bought a 32" lcd tv and im aftr a bracket like this, is this compatible? the horrizontal size is 100mm and vertical is 200mm it just has the 4holes? Cheers Tom

Easycom: this will fit

2-Aug-2007 J: Need to mount a 26" Sharp P50 series LCD to a chimney breast. Will this do the job? (and does it include fixings?)

Easycom: yes it does

22-Aug-2007 tallulah: Is this product suitable to hang a Samsung LE26R88 on a plasterboard wall? Or are you supposed to use a specific fixture for plasterboard? Thanks very much

Easycom: you would need to hang it on a joyst or spar as it would pull out of plasterboard

17-Sep-2007 Christian: Hi, would this be ok for the Mirai DTL-632V200 32?

Easycom: no you need an FL1

27-Dec-2007 Dave: Hi, im looking to buy a wall mount for my new SAMSUNG LE23R86WD. I can see that the spcings are ok, but would like to know the dimensions of the bracket. What is the depth of the bracket as i dont want it to stick out on my chimney breast. Best Regards

Easycom: check out www.avf.co.uk for all the technical specs

29-Dec-2007 lewis: Hi will this bracket fit a sony kdl26u300u and can it be fitted onto a plasterboard wall on the wood fitting? Thanks

Easycom: this should fit the 26 inch Sony but you need to mount it on to battons at least

4-Jan-2008 reg: i have just bought a samsung 32inc lcd and would like to know if this bracket will fit it

Easycom: yes it should

8-Jan-2008 rich: would this be suitable for a hanspree 32inch lcd?

Easycom: yes it should be fine

24-Jan-2008 CBN: Will this bracket take the Sony_KDL-20S4000?

Easycom: yes it will

26-Apr-2008 Ben Mowlam: Can i use this to fit my Samsung 26" LE-26R74BD??

Easycom: Yes, this bracket has many mounting holes and supports TVs up to Vesa200.

27-Apr-2008 Iffy: Is this product compatible with Samsumng LE32R86WD?

Easycom: Yes, it is

15-Sep-2008 Doreen0906: Is this suitable for the Sony Bravia 26inch LCD onto a plasterboard bedroom wall

Easycom: yes it will mount the TV but you must make sure that you attach it to the battons and not just the plaster board